White Base Coat offers dense pigmentation while maintaining nail flexibility after curing. It requires a thin adhesive base for pigment protection and longer lamp curing. Applied in one layer, it’s lightweight but not suitable for nail alignment.
COLOR BASE white is used as a base coat for complex shades of gel varnishes or instead of gel varnish, as a base for rubs and designs.
Recommended for all types of nails.
Advantages of the base:
- reduces the working time of the master
- perfectly self-leveling
- does not give excess volume
- suitable for pedicure
Consistency: medium. The rate of polymerization is low than average. After polymerization: flexible. Pigmentation: high. Acidity: medium.Color:White
Volume: 7.5 ml
How to apply
- Degreasing: mechanically (using a buff) and chemically (using PREP&FINISH and a lint-free tissue) degrease the nail plate
- Dehydration: apply NAIL FRESHER to the entire nail, let it dry in the air until a whitish shade appears on the surface of the nail plate
- Bonding: with a semi-dry brush, apply ULTRABOND acid-free primer to the entire nail, departing from the cuticle and side ridges by 1 mm. Allow to air dry for 15 seconds
* this step can be skipped when MULTI BASE is used
- Base coat: apply a priming coat of cushioning MULTI/RUBBER BASE with a thin/rubbing layer. Polymerize the base coat in a UV lamp for 2-3 minutes, in an LED lamp for 60 seconds
- Color: apply СOLOR BASE. Polymerize the base in a UV lamp for 3-5 minutes, in an LED lamp for 60-90 seconds
- Finish coat: fix the coating with a top coat with UV-filter RUBBER TOP/ STOP SCRATCH TOP. Polymerize in a UV lamp for 2-3 minutes, in an LED lamp for 1 minute
When using a top with a sticky layer of RUBBER TOP - let the coating cool down, then remove the stickiness with PREP&FINISH and a lint-free napkin.