arrow-up

TAKE 10% OFF YOUR FIRST ORDER WITH CODE "WELCOME"

Luna Light Acrygel 12 - Violet

$16.99

Description

Light Acrygel is a medium consistency gel, similar to a rubber base, but cures like hard gel. It is ideal for strengthening, as well as for nail extension. Self-aligns on the nail plate and is compatible with any base/color. Suitable for all types of nails.

Suitable for work on upper and lower forms. 

Features:

  • completely cures when working with professional lamps
  • acid-free, medium consistency
  • pigmentation is average, covers the free edge
  • suitable for strengthening the nail
  • medium hard
  • does not shrink
  • when strengthening with this gel, you need to file the natural nail
  • a rubber base is required
  • thixotropic 
  • can be additionally heated to make the gel thinner consistency.

HOW IS LIQUID ACRYGEL DIFFERENT FROM BASE GEL?

The basis of base coatings are monomers. Depending on how soft or hard they are, their monomer content ranges from 15 to 50%. The composition of liquid polygels is a mixture, a symbiosis of acrylgel/polygel and base. This material consists of more than half (60-80%) of acrylic copolymer - it is the main component of polygel and a small amount of hydroxyethyl methacrylate (HEMA) monomer, the main component of base coatings.

  • the wavelength for polymerization is 365-405 nm
  • UV/Led lamp power 36-48W
  • permissible coating thickness 0.5 mm at the end/ 1 mm at the apex
  • complete polymerization 90-120 sec

Volume: 13 ml

How to Apply

1. Apply a degreaser to remove grease and dirt from the nail plate and air dry for 3-5 seconds.

2. Apply primer to the nail plate to firmly grip the base to the nail and air dry for 1 minute.

3. Apply a thin layer of the first layer of the light acrygel. Dry in a UV lamp for 2 minutes, in LED - 30 seconds.

4. Apply a layer of light acrygel and then align the nail plate. Dry in a UV lamp for 2 minutes, in LED for 30 seconds.

5. Apply gel polish and coat the free edge to avoid chips and peeling. Dry in the UV lamp for 2-3 minutes, in the LED lamp for 30-60 seconds.

6. Apply a gel top coat and coat the free edge, dry in a UV lamp for 2–3 minutes, in a LED lamp for 30–60 seconds, remove the sticky layer with a lint free napkin.